Solar Flush Embedded LED Deck Pathway Step Light ABS Gray Dual CCT IP65 10hr

Nordalight. presents a solar LED step and deck light in ABS — flush-embedded into step risers or flat surfaces, 4W, 280LM, dual CCT (3000K or 6000K), 2000mAh, 10hr runtime, IP65 rated, sets up to 8 units.

Design & Aesthetic

The defining characteristic of this fixture is its relationship to the surface — after installation, the body sits completely flush with the step face or flat deck, leaving only the slim gray ABS panel visible. No protrusion, no shadow gap, no hardware exposed above the plane. At 7.09'' square and 1.77'' deep, it fits within standard step riser and pathway edge dimensions without structural modification on most surfaces. The gray finish integrates naturally across concrete, stone, tile, and timber — invisible by day, a cleanly bordered rectangle of light by night. A verified customer installed these along pool steps and described them as "beautiful... very bright... easy to install."

Lighting Experience

4W integrated LED delivers 280LM — substantially brighter than ambient step markers, calibrated for genuine step safety and pathway guidance. Cool white (6000K) for maximum clarity and safety visibility; warm white (3000K) for welcoming atmosphere. Output projects outward from the flush face across the tread or ground surface below, with no upward spill.

Materials & Construction

• Body: ABS — impact and foot-traffic resistant
• Finish: Gray
• Light source: Integrated LED — 4W, 280LM
• CCT: 3000K warm white or 6000K cool white — selected at order
• Solar panel: Polysilicon 5.5V 250mA
• Battery: 2000mAh
• IP65 — dust and rain sealed
• Working time: 10 hours | Charge time: 8 hours

Size & Configuration Options

• 7.09'' W × 7.09'' D × 1.77'' H
• Cool White: 0.84 lb | Warm White: 0.99 lb
• Sets: 1 Pc / Set of 2 / Set of 4 / Set of 6 / Set of 8

Note: Dimensions shown in imperial units as listed in product specifications (1 in = 2.54 cm - 1 cm = 0.39 in)

Functionality

• Flush embed into step riser vertical face or flat step surface — sits level with the surface
• Solar powered — no wiring, no trenching, no transformer required
• On/off switch control
• Charges in 8 hours; illuminates for 10 hours per charge
• 2000mAh battery maintains performance on consecutive overcast days
• Applicable scene: outdoor staircase, courtyard path, garden trail, porch, villa, pool steps

Technical Specifications

• Material: ABS | Finish: Gray | LED: Integrated 4W | Lumens: 280LM
• CCT: 3000K or 6000K | Solar panel: Polysilicon 5.5V 250mA
• Battery: 2000mAh | Runtime: 10 hrs | Charge: 8 hrs | IP: IP65
• Style: Modern | Mounting: Flush embedded (ground/step face)

Voltage Note: Various electrical versions are available. Products are configured based on destination country requirements and can be supplied for US, EU, UK, AU, and Canada standards where applicable.

Ideal For

• Outdoor staircases, pool steps, courtyard paths, garden trails, and porch edges requiring solar step lighting that sits flush with the surface — no protrusion, no trip hazard
• Step riser vertical face installation or flat step surface embedding on concrete, stone, tile, and timber
• Sets of 4, 6, or 8 for full staircase coverage with automatic nightly operation
• Cool white for safety-critical visibility; warm white for welcoming garden and villa path ambiance

Solar flush-embedded step light, 4W, 280LM — IP65, 10hr runtime, dual CCT, no wiring.